Marvel MA15CPS1RS Owner's Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16
Error Codes
Error Displayed Code Error Description Action to Take
Bin Sensor error
"OFF" will ash continuously in 1
second intervals in the display. No
audible alarm will sound.
Failed temperature sensor. Machine operation will imme-
diately enter an OFF state.
Call service to have the
temperature sensor replaced.
System Sensor error
"ICE" will ash continuously in
the display. No audible alarm will
sound.
Failed condenser temperature sensor. Machine opera-
tion will continue but ice production cycle will not adapt to
varying ambient conditions, so ice quality may vary.
Call service to have the
temperature sensor replaced.
Communication error
Continual ashing of all indicators
on the display.
Loss of communication between the main board and the
user interface.
Call service to have a
diagnostic check.
Error codes:
The ice machine is monitored continuously. Any OPEN or
SHORTED circuit condition with a temperature sensor or
miscommunications between the control and user interface
will initiate an ERROR CODE as listed below:
ICE
Options menu:
Normal and ECO mode:
Your ice machine comes with an optional "ECO" mode.
This new feature allows you to tailor ice production to a
conservative rate, saving approximately 25% energy and
30% water from routine operation. While in this mode ice
production will slow and the appliance will use less water
and electricity. "ECO" mode should only be initi-
ated after there is a full bin of ice. To enter "ECO"
mode do the following:
Press the "MENU" icon twice and the green
"ECO" will ash.
Press and hold the "ON/OFF" icon until the
green "ECO" stops ashing and remains illumi-
nated.
To return to the standard operating rate press the
"MENU" icon twice, the ECO will turn off and
the "ICE" will be ashing. Press and hold the
"ON/OFF" icon until the "ICE" stops ashing
and remains illuminated.
ECO
USING YOUR ELECTRONIC CONTROL
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 95 96

Comments to this Manuals

No comments