Marvel 6CARM Troubleshooting Guide download pdf (Page 4)

INSTALLING YOUR REFRIGERATOR

Leveling Legs

Front Grille, keep

this area open.

Figure 2



The proper locaon will ensure peak performance of your ap-

pliance. We recommend a locaon where the unit will be out

of direct sunlight and away from heat sources. To assure your

product performs to specicaons the recommended installaon

locaon temperature range is from 65 to 90°F (18 to 32°C).

Cabinet Clearance

Venlaon is required from the boom front secon of the unit.

Keep this area open and clear of any obstrucons. Adjacent

cabinets and counter top can be installed around the unit as long

as the grille and door access remain unobstructed.

Figure 3

Rear of unit

Rear leveling legs

at outside corners

Access cover

removed

Leveling Legs

Adjustable legs at the front and rear corners of the unit should

be set so the unit is rmly posioned on the oor and level from

side to side and front to back. The overall height of your Marvel

refrigerator may be adjusted from 33-7/8” (86.1cm) with the lev-

eling legs turned in, and up to 34-7/8” (88.6cm) with the leveling

legs extended.

To adjust the leveling legs, place the refrigerator on a solid sur-

face and protect the oor beneath the legs to avoid scratching

the oor. With the assistance of another person, lean the refrig-

erator back enough to access the front leveling legs and remove

the weight. Raise or lower the legs to the required dimension

by turning the legs. Repeat this process for the rear by lng

the refrigerator forward using cauon to prevent the door from

opening. On a level surface check the refrigerator for levelness

and adjust accordingly.

The front grille (toe kick) screws may be loosened and adjusted

to the desired height. When adjustment is complete ghten the

two toe kick screws. (See Figure 4).

Front Grille

Do not obstruct the front grill. The openings within the front

grill allow air to ow through the condenser heat exchanger.

Restricons to this air ow will result in increased energy usage

and loss of cooling capacity. For this reason it is important this

area to not be obstructed and the grill openings kept clean. AGA

MARVEL does not recommend the use of custom made grills as

air ow may be restricted because of inadequate openings. (See

Figure 2).

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Marvel 6CARM Troubleshooting Guide Page 4

Comments to this Manuals

Related products and manuals for Unknown Marvel 6CARM